TLC Pain Therapy Laser Technical Specifications

The TLC Professional Pain Therapy Laser and the TLC Professional + Pain Therapy Laser both have the same technical specifications for the Class IV output, however the TLC Professional + has two additional Class III output ports to attach optional devices.

TLC Professional and Professional + Pain Therapy Laser Specifications

 

Wavelength: 980nm wavelength

Power Output: 12,000 mW diode, 2400 mW/cm2 (Largest approved diodes in the industry)

Beam Diameter: 24 mm (largest beam size in the industry)

Energy Denisty Per CM2: Range from 15 Joules/cm2 to 6350 Joules/cm2 (This high density allows for a more rapid response to treatment and a quicker treatment time for patient and Physician)

Weight: 14 lbs (Light enough to carry with you)

Warrany: 1 year

Other Features: Deep penetrating beams; adjustable beam focus; continuous beam operating mode; and accurate, safe, and reproducible results due to our proprietary technology.

Additional Information

 

The unit comes assembled with the exception of attaching the power cord and the foot pedal. Once the unit is plugged in and ready for use turn on the key and the unit will power up and beep to let you know the system is ready to use.

 

There are several safety features that will disable the unit if needed.

 

Lifting your foot from the pedal will stop the unit

Pushing in the black knob on the power panel will disable the unit.

Depressing the red panic knob will disconnect the power.

 

The control panels allow for dialing in the appropriate power setting for the areas to be treated. The laser has an upper power output of approximately 12 watts at the aperture. Some other units on the market claim a 12 watt output but they deliver less power at the aperture. When using the device it is important to receive feedback from the customer to avoid over treating an area. Heat will begin to build up as the session progresses and the customer will let you know if it is too hot.

As the wand is moved over the area needing attention, most customers can immediately feel the light doing its work. In fact, 80% of our customers tell us that they experience significant relief in the very first session.

 

Depressing the foot pedal activates the delivery of the focused light to the wand. The power output is from 1 to 12 watts at 980nm. Most sessions are no longer than 10 minutes and require 5 to 10 sessions to achieve a lasting result.

 

It is required that everyone in the room where treatments are administered wear appropriate protective eye ware with an optical density of greater than 5 at 980nm.

Accessories (Available for use only with the TLC Professional + Pain Therapy Laser)

Pad: Used for topical therapy over an area with low power application. Typically, this would be used for shoulders, knees or other areas.

 

Probe: This device is used for smaller areas such as fingers or small aches and pains.

 

Cavity Probe: When medical professionals need light therapy for ears, vaginal, rectal, or oral application this is the appropriate device.

For frequently asked questions regarding the TLC Pain Therapy Lasers Click Here

 

For more scientific and detailed explanation of how Laser Therapy works Click Here

An authorized distributor of Millennial Health Systems products.

© Copyright 2012 TLC Health Systems